No more pluggin the blow tube

Free Image Galleries
GlassArtist.Org, GlassPipes.Org

Pipemakers Forum > Techniques > No more pluggin the blow tube
	<< Prev Topic \| Next Topic >>

Author	Comment
NickTheStripper Member Posts: 10 (6/28/04 3:56 pm) Reply	No more pluggin the blow tube I figured since I had some spare time I'd post a tip someone gave me. I hope this helps someone out. I still have a real problem pulling good point on 50mm tubing so here's what I've been doing when doing i/o prodo. attach an peice of 10mm rod to the end of a piece of 50mm tube, flame cut the tube, tear a hole in the end, flare it(or not), decorate it, close it down on a blowtube. That's the shit!!!!!!!!! Makes prodo i/o really fast. the mirage helps a little too. Scene?? I ain't part of no fuckin scene. GG Allin
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)
Unknown (11/20/09 11:11 am) Reply	Unknown (This post is missing and can not be restored)

<< Prev Topic | Next Topic >>

Email This To a Friend
Topic Control Image

Topic Commands

Click to receive email notification of replies

Click to stop receiving email notification of replies